Applications

• Any wooden work for kitchen, wall, terrace bathroom etc. where water exposure is high.
• For all type of wood of cold press & hot press.
• For bonding in all type of woodworking like plywood, wood, laminates, veneers, particleboard, block board/hard board, MDF to each other.
• Furniture, handicraft, sports goods, packaging & book binding, paper labelling, paper tube, wall paper, carpet manufacturing.
• Also recommended for bonding any two material where at lese one of them is porous eg. Paper, cardboard, particleboard etc. and other related applications.

Advantages

• High initial grab
• Single component ready to use
• Economical in long run
• 5 days continuous water resistance
• 6 hr boiling water resistance
• Gives higher coverage
• Eco-friendly with low odour
• Good spread-ability

How to use

Resiwood Hydra+ is having a very good spread-ability can be apply with the help of Astral Adhesive Resiwood applicator or by brush, roller or fingers. The usual procedure to be follow is:

• Clean both the surfaces to be bonded.
• It is ready to use product so dilution is not recommended.
• Apply a thin coat of Resiwood Hydra+ on both or one surface – as per requirement and spread evenly in 5-10 min.
• Press the two surfaces together and keep under pressure with the help of either clamp, nails, wooden support etc. till the adhesive drives completely. Excess adhesive pressed outside the
• joints should be wipe out with a wet cloth.

Packing

• In pouch 0.8 kg
  In carboys of 5kg, 10 kg, 20 kg, 50 kg & 60 kg

Handling precautions

Place the cap immediately after use. Store under cool & dry place.

More about Resiwood Hydra+ (astraladhesives.com)