MarineKoat- Water Resistant Plywood Coating

MarineKoat- Water Resistant Plywood Coating

Pidilite Marinekoat is a polymer based water resistant coating specially designed for protecting exposed plywood surface from water. It can be applied on wall facing side of furniture in order the protect the plywood from potential water seepage.

Method of Application :

• Clean the surface of plywood from dust, dirt, oil, grease etc.
• Dip the brush inside the pack and stir the material properly before each use.
• Apply the 1st coat of Marinekoat on entire Plywood surface evenly.
• Wait for 10 to 15 minutes.
• Apply 2nd coat of the liquid over the 1st coated surface as explained above.
• Minimum 2 coat will be required for proper water resistance.
  For highly porous substrates. Apply a 3rd coat at an interval of 10 minutes. However, do not try to apply over and excess coat.
• After application, dip the brush in normal water and clean it property for re use in next Job.

Other Pidilite Products