Skip to Content

Astral- Bondtite Deluxe - 50kg

https://www.gharabanao.com/web/image/product.template/16520/image_1920?unique=9e9e87a
Astral Adhesives Bondtite Deluxe is a single component, water resistant PVA emulsion adhesive used for woodworking and general bonding applications. Astral Adhesives Bondtite Deluxe is a specially designed, fast drying heat and water resistance product for wood to wood, ply to wood, veneer, decorative laminates, MDF/particle board, block board/ hard board to each other. Best results can be obtained, when at least one of them is porous.

₹ 0.00 0.0 INR ₹ 0.00

₹ 9,300.00

This combination does not exist.

White Glue

Terms and Conditions
30-day money-back guarantee
Shipping: 2-3 Business Days

Astral Adhesives Bondtite Deluxe can be used in following applications:

  • For bonding of all type of wood working like plywood, wood, laminates, veneers, particle board, block board/hard board, MDF to each other
  • Furniture, handicraft, sports goods, packaging & book binding, paper labelling, paper tube, wall paper, carpet manufacturing
  • Also recommended for bonding any two materials where at lese one of them is porous eg. Paper, card board, particle board etc. and other related applications

Advantages

  • Single component ready to use
  • Economical in long run
  • Unsurpassed bonding strength
  • Resistance to water and heat
  • Gives higher coverage
  • Eco-friendly with low odour
  • Good spreadability

How to Use

Astral Adhesives Bondtite Adhesives Deluxe has very good spreadability and can be applied with the help of the Astral Adhesive Resiwood applicator, by brush, roller or fingers. The usual procedure to be followed is:

  • Clean both the surfaces to be bonded
  • It is ready to use product so dilution is not recommended
  • Apply a thin coat of Resiwood Classic 666 on both or one surface – as per requirement and spread evenly in 5-10 minutes
  • Press the two surfaces together and keep under pressure with the help of either a clamp, nails, wooden support etc., till the adhesive dries completely. Excess adhesive pressed outside the joints should be wiped out with a wet cloth.

Our latest content

Check out what's new in our company !

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provide both a filter and a template to use.